mikep
Prefers Maryanne to Ginger
Posts: 81
|
Post by mikep on Mar 17, 2010 0:01:38 GMT -5
the cheap way....
|
|
mikep
Prefers Maryanne to Ginger
Posts: 81
|
Post by mikep on Mar 17, 2010 0:02:49 GMT -5
This one was a pain in the butt
|
|
mikep
Prefers Maryanne to Ginger
Posts: 81
|
Post by mikep on Mar 17, 2010 0:18:06 GMT -5
Had to rebuild both Allison's.
|
|
mikep
Prefers Maryanne to Ginger
Posts: 81
|
Post by mikep on Mar 17, 2010 0:29:45 GMT -5
Complete tear down, + new bearings & plates
|
|
mikep
Prefers Maryanne to Ginger
Posts: 81
|
Post by mikep on Mar 17, 2010 0:31:27 GMT -5
Replaced orig cork faced plates with Gortex
|
|
|
Post by 34Hatt on Mar 17, 2010 13:45:22 GMT -5
Nice Job realy like the new mounts. It reminded me of my shaft tube job its a long story will have to get some pictures of the tooling I made. I think you guys will like the story
|
|
mikep
Prefers Maryanne to Ginger
Posts: 81
|
Post by mikep on Mar 18, 2010 0:03:47 GMT -5
Thanks.... Did you cover the shafts with tubes/tunnels to reduce drag?
|
|
|
Post by 34Hatt on Mar 18, 2010 20:26:54 GMT -5
Thanks.... Did you cover the shafts with tubes/tunnels to reduce drag? Long story short version the tubes were made smaller in I.D resleeved due to shaft misaligned these are the tubes from bulkhead to the bottom. They were re-tubed smaller I needed to open them back up to original size in order to up the shaft size for the re-power!
|
|
nightcop
My best friend owns a Hatteras
Posts: 14
|
Post by nightcop on Mar 19, 2010 17:05:51 GMT -5
Ok I.m goona try to post some work pics from this winter, not as aggressive works as some but at it ever weekend. 1st is my cradle, wood split in both frt and back, dug out splits and used west to fill and than repaint. also removed crane and powder coated it.
|
|
nightcop
My best friend owns a Hatteras
Posts: 14
|
Post by nightcop on Mar 19, 2010 17:10:11 GMT -5
Ok I cant get the pics to upload, I put them in the attachment but they dont show in the post, what am I doing wrong? crap worked that time
|
|